11 November 1994 Laminar microchannel optics for x rays and neutrons
Author Affiliations +
Abstract
By stacking many very thin extraordinarily smooth sheets of material with a gap between each to form open channels, a new class of optical components for x-rays, ultraviolet light and neutrons can be made. Radiation propagates via grazing incidence reflections from the channel walls. If the stack is bent, radiation can be made to bend through large angles, and by properly forming the entrance or exit aperture, concentrators or collimators can be fabricated. This paper contains a discussion of the theory and fabrication of these laminar microchannel optics. Direct control over the reflecting surface and the stacking of the channels give these optics some unique advantages over other microchannel optics. Channel walls can be made as thin as 12 micrometers and coated with nearly any desired reflecting material and surface roughness below 2 angstroms can be readily achieved. Open spaces between the planar channels are as small as 8 micrometers or as large as desired. These optics provide the capability to bend, focus, or collimate broad energy bandwidths of radiation with optics that have apertures of up to several cm2, high throughput, and small size.
© (1994) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
David B. O'Hara, Samuel L. Espy, Scott Scarborough, Melvin L. Price, "Laminar microchannel optics for x rays and neutrons", Proc. SPIE 2279, Advances in Multilayer and Grazing Incidence X-Ray/EUV/FUV Optics, (11 November 1994); doi: 10.1117/12.193146; https://doi.org/10.1117/12.193146
PROCEEDINGS
11 PAGES


SHARE
RELATED CONTENT

Nested parabolic reflective optics for laser plasmas
Proceedings of SPIE (September 18 1995)
Conical foil optics for the collimation of soft x rays
Proceedings of SPIE (November 11 1994)
Lacquer Coated X-Ray Optics
Proceedings of SPIE (October 21 1986)
XMM flight model mirror effective area measurements
Proceedings of SPIE (September 06 1999)
X ray investigations of a near surface layer of metal...
Proceedings of SPIE (November 02 2000)

Back to Top