Paper
28 September 1994 Influence of adhesion promoters on the aging characteristics of optical fibers in water
Jan-Willem Leclercq, Anton H. E. Breuls
Author Affiliations +
Abstract
The role of three different adhesion promoters in the primary coatings of optical fibers on the resistance of fibers to aging in water has been investigated. The use of an acid phosphate ester as adhesion promoter gave fibers higher strength and n-value prior to aging when compared to standard silane adhesion promoters and copolymerizable silane coupling agents. After 6 months of zero stress aging in water of 60 degree(s)C, no change in strength was found for all fibers except for 1 fiber. The high n-value of fibers with the phosphate ester adhesion promoter gave fibers improved resistance (or longer time to failure) to high stresses in the static fatigue test in water of 85 degree(s)C. Tn this test, the time to failure for low applied stresses, where zero stress aging determines lifetime, was not depending on the type of adhesion promoter. other aspects of the coating as the level of adhesion to the glass, the chemical composition and the mechanical characteristics are playing a role as well in the resistance of fibers to stress free aging and static fatigue in water.
© (1994) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jan-Willem Leclercq and Anton H. E. Breuls "Influence of adhesion promoters on the aging characteristics of optical fibers in water", Proc. SPIE 2290, Fiber Optic Materials and Components, (28 September 1994); https://doi.org/10.1117/12.187450
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical fibers

Coating

Resistance

Failure analysis

Glasses

Chemistry

Corrosion

RELATED CONTENT


Back to Top