Paper
1 November 1994 Long-term mechanical reliability of single-mode optical fibers
Fredrick Bacon, Mokhtar S. Maklad
Author Affiliations +
Abstract
The long-term mechanical reliability of polarization-maintaining and single-polarization single mode optical fibers drawn from ground preforms is of growing interest. This paper will report the results of the static fatigue tensile strength behavior under axial load at ambient conditions for PM and PZ types of single mode fiber produced from five ground preforms. The measured values of the fatigue resistance parameters N (22.6 +/- 1.3 to 27.9 +/- 1.5) are consistently higher than the N-parameter of 19.7 +/- 0.5 measured under identical conditions for standard commercially available single-mode fiber drawn from non-ground preforms. Large Weibull moduli of fiber from ground preforms suggest fiber of uniform strength distribution. Although fractographic analyses of failed fiber end faces do show extrinsic failure modes due to micro-cracks and zirconia particulates and intrinsic failures due to molybdenum inclusions, the analyses do not reveal failure modes peculiar to diamond grinding or high internal stresses.
© (1994) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Fredrick Bacon and Mokhtar S. Maklad "Long-term mechanical reliability of single-mode optical fibers", Proc. SPIE 2292, Fiber Optic and Laser Sensors XII, (1 November 1994); https://doi.org/10.1117/12.191850
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Failure analysis

Optical fibers

Coating

Glasses

Reliability

Sensors

Fiber optics

Back to Top