9 September 1994 Automated lower limb prosthesis design
Author Affiliations +
Proceedings Volume 2359, Visualization in Biomedical Computing 1994; (1994) https://doi.org/10.1117/12.185211
Event: Visualization in Biomedical Computing 1994, 1994, Rochester, MN, United States
The design of lower limb prostheses requires definitive geometric data to customize socket shape. Optical surface imaging and spiral x-ray computed tomography were applied to geometric analysis of limb residua in below knee (BK) amputees. Residua (limb remnants after amputation) of BK amputees were digitized and measured. Surface (optical) and volumetric (CT) data of the residuum were used to generate solid models and specify socket shape in (SDRC I-DEAS) CAD software. Volume measurements on the solid models were found to correspond within 2% of surface models and direct determinations made using Archimedean weighing. Anatomic 3D reconstruction of the residuum by optical surface and spiral x-ray computed tomography imaging are feasible modalities for prosthesis design.
© (1994) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Gulab H. Bhatia, Gulab H. Bhatia, Paul K. Commean, Paul K. Commean, Kirk E. Smith, Kirk E. Smith, Michael W. Vannier, Michael W. Vannier, } "Automated lower limb prosthesis design", Proc. SPIE 2359, Visualization in Biomedical Computing 1994, (9 September 1994); doi: 10.1117/12.185211; https://doi.org/10.1117/12.185211

Back to Top