10 February 1995 Design and use of the IR gas-cloud scanner for measurement and imaging of the spatial distribution of gases at workplaces
Author Affiliations +
Proceedings Volume 2366, Optical Instrumentation for Gas Emissions Monitoring and Atmospheric Measurements; (1995) https://doi.org/10.1117/12.205553
Event: Optical Sensing for Environmental and Process Monitoring, 1994, McLean, VA, United States
Abstract
Usual sampling methods and instruments for checking compliance with `threshold limit values' (TLV) of gaseous components do not provide much information on the mechanism which caused the measured workday average concentration. In the case of noncompliance this information is indispensable for the design of cost effective measures. The infrared gas cloud (IGC) scanner visualizes the spatial distribution of specific gases at a workplace in a quantitative image with a calibrated grayvalue scale. This helps to find the cause of an over- exposure, and so it permits effective abatement of high exposures in the working environment. This paper deals with the technical design of the IGC scanner. Its use is illustrated by some real-world problems. The measuring principle and the technical operation of the IGC-scanner are described. Special attention is given to the pros and cons of retro-reflector screens, the noise reduction methods and image presentation and interpretation. The latter is illustrated by the images produced by the measurements. Essentially the IGC scanner can be used for selective open-path measurement of all gases with a concentration in the ppm range and sufficiently strong distinct absorption lines in the infrared region between 2.5 micrometers and 14.0 micrometers . Further it could be useful for testing the efficiency of ventilation systems and the remote detection of gas leaks. We conclude that a new powerful technique has been added to the industrial hygiene facilities for controlling and improving the work environment.
© (1995) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Willem M. ter Kuile, Willem M. ter Kuile, J. J.F. van Veen, J. J.F. van Veen, Bas Knoll, Bas Knoll, } "Design and use of the IR gas-cloud scanner for measurement and imaging of the spatial distribution of gases at workplaces", Proc. SPIE 2366, Optical Instrumentation for Gas Emissions Monitoring and Atmospheric Measurements, (10 February 1995); doi: 10.1117/12.205553; https://doi.org/10.1117/12.205553
PROCEEDINGS
12 PAGES


SHARE
Back to Top