23 March 1995 Confocal scanning beam laser microscope/macroscope: applications requiring large data sets
Author Affiliations +
A new confocal scanning beam laser microscope/macroscope is described that combines the rapid scan of a scanning beam laser microscope with the large specimen capability of a scanning stage microscope. This instrument combines an infinity-corrected confocal scanning laser microscope with a scanning laser macroscope that uses a telecentric f*(theta) laser scan lens to produce a confocal imaging system with a resolution of 0.25 microns at a field of view of 50 microns to 5 microns at a field of view of 75,000 microns. The frame rate is 3 seconds per frame for a 512 X 512 pixel image, and 45 seconds for a 2048 X 2048 pixel image. Changes made in the instrument to increase the image capture from 512 X 512 pixels to 2048 X 2048 pixels are described. Applications discussed focus on three important advantages of the instrument over a confocal scanning laser microscope: an extremely wide range of magnification, the ability to record very large data sets, and the ability to image very large specimens. Examples are presented from imaging of fibers in paper, latent fingerprint detection, and reflected-light and photoluminescence imaging of porous silicon.
© (1995) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Arthur E. Dixon, Arthur E. Dixon, Savvas Damaskinos, Savvas Damaskinos, Alfonso Ribes, Alfonso Ribes, Eileen Seto, Eileen Seto, Marie-Claude Beland, Marie-Claude Beland, Tetsu Uesaka, Tetsu Uesaka, Brian E. Dalrymple, Brian E. Dalrymple, Sid P. Duttagupta, Sid P. Duttagupta, Philippe M. Fauchet, Philippe M. Fauchet, } "Confocal scanning beam laser microscope/macroscope: applications requiring large data sets", Proc. SPIE 2412, Three-Dimensional Microscopy: Image Acquisition and Processing II, (23 March 1995); doi: 10.1117/12.205331; https://doi.org/10.1117/12.205331

Back to Top