14 July 1995 Very high laser damage resistant HR-coatings prepared by an advanced sputtering technique (Abstract Only)
Author Affiliations +
The CEA Limeil-Valenton Inertial Confinement Fusion (ICF) program is currently addressing, in close collaboration with LLNL, the critical physics and technology issues for demonstrating and exploiting high-gain ICF. We believe that a compelling strategy for our national ICF program is to demonstrate ignition and moderate gain at the beginning of the next century with an upgrade to the existing Phebus laser to provide 1.8 MJ of 0.351- micron light in a nanosecond regime. The proposed MJ-range laser system will consist of 288 optically independent and individually targetable beams each having a final optical aperture of approximately 35 centimeters. While Phebus used a multistage, single-pass amplifier design, the proposed MJ laser will use a single-stage multipass amplifier design so-called L-Turn. In the L-Turn architecture, a laser pulse enters the cavity and makes 4 passes in the resonator using different pathways before being directed out. The pulse reflects off a pick-off 6 x 6 cm square mirror that may withstand very high fluences. (Abstract truncated.)
© (1995) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Stephane E. Seznec, Anne Fornier, C. Cordillot, "Very high laser damage resistant HR-coatings prepared by an advanced sputtering technique (Abstract Only)", Proc. SPIE 2428, Laser-Induced Damage in Optical Materials: 1994, (14 July 1995); doi: 10.1117/12.213714; https://doi.org/10.1117/12.213714


Advanced LIDT testing station in the frame of the HiLASE...
Proceedings of SPIE (December 04 2012)
High-average-power quasi-cw tunable polymer laser
Proceedings of SPIE (April 17 1995)
X1 UV laser trigger system
Proceedings of SPIE (May 04 1999)
Alexandrite Laser Technology
Proceedings of SPIE (July 16 1986)

Back to Top