19 May 1995 Resist contrast requirement for sub-0.25-μm lithography
Author Affiliations +
Abstract
In this paper, the effect of resist contrast on the exposure latitude, printing bias, and dark erosion are discussed in the context of proximity x-ray lithography. Positive chemically amplified resists are studied. Both experimental and simulation results show that an exposure latitude of 28% can be obtained for 0.16 micrometers dense lines and a 0.36 micrometers pitch using point source x-ray lithography with a 25 micrometers proximity gap.
© (1995) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jerry Z.Y. Guo, Anthony E. Novembre, Herschel M. Marchman, Joseph A. Abate, John Frackoviak, David N. Tomes, Allen G. Timko, George K. Celler, "Resist contrast requirement for sub-0.25-μm lithography", Proc. SPIE 2437, Electron-Beam, X-Ray, EUV, and Ion-Beam Submicrometer Lithographies for Manufacturing V, (19 May 1995); doi: 10.1117/12.209180; https://doi.org/10.1117/12.209180
PROCEEDINGS
8 PAGES


SHARE
RELATED CONTENT

Process latitudes in projection printing
Proceedings of SPIE (August 01 1991)
Trends In X-Ray Lithography
Proceedings of SPIE (June 30 1982)
SNR200 chemically amplified resist optimization
Proceedings of SPIE (July 07 1997)
Sub-100-nm imaging in x-ray lithography
Proceedings of SPIE (June 25 1999)
Present status and technical issues of x-ray lithography
Proceedings of SPIE (September 01 1998)

Back to Top