22 May 1995 Scatterometry for 0.24- to 0.70-μm developed photoresist metrology
Author Affiliations +
Abstract
Scatterometry, the characterization of periodic structures via diffracted light analysis, is shown to be a viable and versatile metrology for critical dimensions as small as 0.24 micrometers . Scatterometry is rapid, nondestructive, inexpensive, and potentially useful for on- line control during several microlithographic processing steps. This paper discusses two recent studies in which scatterometry was applied to the measurement of developed photoresist patterns. First, scatterometric measurements of developed resist lines in the 0.38 micrometers to 0.70 micrometers range will be presented. Results from four sample wafers are shown to be consistent with SEM measurements. For one wafer, the average deviation of scatterometry linewidth measurements form top-down SEM measurements, over a broad exposure range, is 14.5 nm. Moreover, our scatterometer is shown to be highly linear with the SEM; linearity coefficients have typically been above 0.99. The goal of our second project has been to determine whether scatterometry measurements are affected by variations in the integrated circuit production process. A set of twenty-five wafers was fabricated with deliberate variations in the exposure dose and the underlying film thicknesses. We are presently investigating the effects of the film thicknesses on the measurements of critical dimensions (CDs) as small as 0.24 micrometers . Preliminary results indicate that CDs and multiple thin films can be simultaneously measured by applying multi-parameter prediction algorithms to the scattered light data. Results from four different prediction algorithms are given. Finally, the repeatability of the scatterometer is shown to be excellent: 0.5 nm for consecutive measurements and 0.8 nm for day-to-day measurements. The results of an extensive repeatability/precision experiment are presented.
© (1995) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Michael R. Murnane, Christopher J. Raymond, Steven L. Prins, S. Sohail H. Naqvi, John Robert McNeil, "Scatterometry for 0.24- to 0.70-μm developed photoresist metrology", Proc. SPIE 2439, Integrated Circuit Metrology, Inspection, and Process Control IX, (22 May 1995); doi: 10.1117/12.209227; https://doi.org/10.1117/12.209227
PROCEEDINGS
10 PAGES


SHARE
RELATED CONTENT

Development of a scatterometry reference standard
Proceedings of SPIE (May 01 2014)
Scatterometric sensor for lithography
Proceedings of SPIE (September 16 1994)
Subwavelength photoresist grating metrology using scatterometry
Proceedings of SPIE (September 22 1995)
Grating parameter estimation using scatterometry
Proceedings of SPIE (December 15 1993)

Back to Top