18 February 1981 A Surface Acoustic Wave (SAW) Charge Transfer Imager
Author Affiliations +
Abstract
Surface acoustic waves excited in a Si-Si02-ZnO layered structure can produce a traveling electric field in the silicon substrate. Charges stored in the traveling potential wells can be transferred at high speed and density and with less complexity than conventional coupled devices. The monolithic structure under investigation for the SAW-charge transfer device consists of a silicon substrate, a thin silicon dioxide insulating layer on top of which a ZnO piezoelectric film is deposited by sputtering. The surface acoustic waves are excited by interdigital transducers. The signal charge is injected into traveling potential wells that travel with the velocity of sound. The presence of a thin shorting plate placed on the ZnO film, over the charge transfer region can enhance the acoustoelectric potential at the Si-Si02 interface, thus resulting in a more efficient device. An 80 MHz, 2g-second SAW-CCD has successfully been fabricated. An optical application utilizing such a structure is proposed. It can be used in place of a conventional interline transfer design. Surface acoustic waves are launched before the charges are transferred from the sensor region to the transport region.
© (1981) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
N. A. Papanicolauo, N. A. Papanicolauo, H. C. Lin, H. C. Lin, } "A Surface Acoustic Wave (SAW) Charge Transfer Imager", Proc. SPIE 0244, Mosaic Focal Plane Methodologies I, (18 February 1981); doi: 10.1117/12.959316; https://doi.org/10.1117/12.959316
PROCEEDINGS
8 PAGES


SHARE
Back to Top