Sub-micron low-k1 imaging characteristics using a DUV printing tool and binary masks

Pei-yang Yan; Robert F. Hainsey; Jeff N. Farnsworth; Julaine H. Neff

doi:10.1117/12.209259

26 May 1995 Sub-micron low-k1 imaging characteristics using a DUV printing tool and binary masks

Pei-yang Yan, Robert F. Hainsey, Jeff N. Farnsworth, Julaine H. Neff

Proceedings Volume 2440, Optical/Laser Microlithography VIII; (1995) https://doi.org/10.1117/12.209259
Event: SPIE's 1995 Symposium on Microlithography, 1995, Santa Clara, CA, United States

Abstract

In this paper, wafer level experimental results on the characteristics of a low-k₁ submicron lithography processes using binary mask and deep ultraviolet (DUV) wavelength (248 nm) printing tool will be discussed. In the study, we investigated the nonlinear response of wafer resist critical dimension (CD) at different pitches to the mask CD. The CD nonlinearity is due to the combination of relatively poor optical aerial image quality at low-k₁ imaging and resist processes. Operating a lithographic process at this nonlinear region presents an issue since only limited process windows are available. In addition, it requires both proximity correction for larger features on the mask and tighter mask CD control. The later requirement, in practice, is rather difficult to achieve with current mask technology. In order to avoid operating low-k₁ lithography processes at CD nonlinear region, improvement of aerial image quality is obviously needed. Although aerial image quality improvement can be achieved with different advanced lithographic enhancement techniques such as phase shift masks and off- axis illumination, there are different process issues related to each of the techniques as well. With conventional illumination source and binary mask, one of the option left to enhance aerial image quality is mask biasing. Our experimental results show that by positively biasing the mask, i.e., mask chrome CD line dimension is larger than targeted resist CD, CD nonlinearity for low-k₁ processes can be improved. For low- k₁ processes, the isofocal bias of different feature sizes (different k₁ factor) was also found to be different. A strong dependence of isofocal bias on pitch was observed. Again, mask biasing can help to shift the isofocal CD of critical dimensions to the target CD. However, in our study, we found that for certain resist, opposite mask biases are required to achieve CD linear response and zero isofocal bias. In this case, tradeoffs between mask CD control, proximity effect, and process window need to be considered.

Citation Download Citation

Pei-yang Yan, Robert F. Hainsey, Jeff N. Farnsworth, and Julaine H. Neff "Sub-micron low-k1 imaging characteristics using a DUV printing tool and binary masks", Proc. SPIE 2440, Optical/Laser Microlithography VIII, (26 May 1995); https://doi.org/10.1117/12.209259

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available