20 April 1995 Acoustic emission testing on an F/A-18 E/F titanium bulkhead
Author Affiliations +
Abstract
An important opportunity recently transpired at Northrop Grumman Corporation to instrument an F/A - 18 E/F titanium bulkhead with broad band acoustic emission sensors during a scheduled structural fatigue test. The overall intention of this effort was to investigate the potential for detecting crack propagation using acoustic transmission signals for a large structural component. Key areas of experimentation and experience included (1) acoustic noise characterization, (2) separation of crack signals from extraneous noise, (3) source location accuracy, and (4) methods of acoustic transducer attachment. Fatigue cracking was observed and monitored by strategically placed acoustic emission sensors. The outcome of the testing indicated that accurate source location still remains enigmatic for non-specialist engineering personnel especially at this level of structural complexity. However, contrary to preconceived expectations, crack events could be readily separated from extraneous noise. A further dividend from the investigation materialized in the form of close correspondence between frequency domain waveforms of the bulkhead test specimen tested and earlier work with thick plates.
© (1995) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Christopher A. Martin, Christopher A. Martin, Craig B. Van Way, Craig B. Van Way, Allen J. Lockyer, Allen J. Lockyer, Jayanth N. Kudva, Jayanth N. Kudva, Steve M. Ziola, Steve M. Ziola, } "Acoustic emission testing on an F/A-18 E/F titanium bulkhead", Proc. SPIE 2444, Smart Structures and Materials 1995: Smart Sensing, Processing, and Instrumentation, (20 April 1995); doi: 10.1117/12.207672; https://doi.org/10.1117/12.207672
PROCEEDINGS
8 PAGES


SHARE
Back to Top