Vibration control of plates with active constrained-layer damping

Amr M. Baz; Jeng-Jong Ro

doi:10.1117/12.208908

5 May 1995 Vibration control of plates with active constrained-layer damping

Amr M. Baz, Jeng-Jong Ro

Proceedings Volume 2445, Smart Structures and Materials 1995: Passive Damping; (1995) https://doi.org/10.1117/12.208908
Event: Smart Structures and Materials '95, 1995, San Diego, CA, United States

Abstract

Bending vibration of flat plates is controlled using patches of active constrained layer damping (ACLD) treatments. Each ACLD patch consists of a visco-elastic damping layer which is sandwiched between two piezo-electric layers. The first layer is directly bonded to the plate to sense its vibration and the second layer acts as an actuator to actively control the shear deformation of the visco-elastic damping layer according to the plate response. With such active/passive control capabilities the energy dissipation mechanism of the visco-elastic layer is enhanced and its damping characteristics of the plate vibration is improved. A finite element model is developed to analyze the dynamics and control of flat plates which are partially treated with multi-patches of ACLD treatments. The model is validated experimentally using an aluminum plate which is 0.05 cm thick, 25.0 cm long, and 12.5 cm wide. The plate is treated with two ACLD patches. Each of which is made of SOUNDCOAT (Dyad 606) visco- elastic layer sandwiched between two layers of AMP/polyvinylidene fluoride (PVDF) piezo- electric films. The piezo-electric axes of the patches are set at zero degrees relative to the plate longitudinal axis to control the bending mode. The effect of the gain of a proportional control action on the system performance is presented. Comparisons between the theoretical predictions and the experimental results suggest the validity of the developed finite element model. Also, comparisons with the performance of conventional passive constrained layer damping clearly demonstrate the merits of the ACLD as an effective means for suppressing the vibration of flat plates.

Citation Download Citation

Amr M. Baz and Jeng-Jong Ro "Vibration control of plates with active constrained-layer damping", Proc. SPIE 2445, Smart Structures and Materials 1995: Passive Damping, (5 May 1995); https://doi.org/10.1117/12.208908

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available