Paper
31 March 1995 Degree of IR laser thermal effect on high temperature superconducting samples
Emma N. Lotkova, Sergey D. Zotov, Eugene M. Kudriavtsev, B. H. Makeev
Author Affiliations +
Proceedings Volume 2502, Gas Flow and Chemical Lasers: Tenth International Symposium; (1995) https://doi.org/10.1117/12.204884
Event: Gas Flow and Chemical Lasers: Tenth International Symposium, 1994, Friedrichshafen, Germany
Abstract
The temperature of the high temperature superconducting (HTSC) sample surface, T, irradiated by the c.w. IR CO-laser was measured by the pyrometric method. The YBa2Cu3O7 single crystals, YBa2Cu3O6.2, YBa2Cu3O6.9, and the Nd1.85Ce0.15CuO4 ceramic samples were studied. The experimental data were compared with the theoretical estimations. The verified values of the heat conductivity, k, were derived from this comparison. Using these k values, the T data for the case of the pulse laser irradiation obtained in our previous investigations of laser irradiation effects were refined. The results of the present work confirmed that effects of the IR laser irradiation seen in our previous works cannot be explained by pure thermal action as the degree of the IR laser thermal effects, i.e., the heating, is relatively small in that experiments, and the T values are lower than it is needed for appreciable changes in properties of the HTSC samples being under consideration.
© (1995) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Emma N. Lotkova, Sergey D. Zotov, Eugene M. Kudriavtsev, and B. H. Makeev "Degree of IR laser thermal effect on high temperature superconducting samples", Proc. SPIE 2502, Gas Flow and Chemical Lasers: Tenth International Symposium, (31 March 1995); https://doi.org/10.1117/12.204884
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Ceramics

Crystals

Laser irradiation

Thermal effects

Infrared lasers

Superconductors

Temperature metrology

Back to Top