9 October 1995 Simulation of contaminant flow in a laboratory-scale porous system
Author Affiliations +
Proceedings Volume 2504, Environmental Monitoring and Hazardous Waste Site Remediation; (1995) https://doi.org/10.1117/12.224137
Event: European Symposium on Optics for Environmental and Public Safety, 1995, Munich, Germany
Abstract
The microscopic movement of contaminants in a porous medium has been simulated in an experiment. The approach has been to study the microscale transport processes using a novel nonintrusive fluorescence imaging technique developed in our laboratories. The system studied consists of a packed porous column with a refractive index-matched fluid seeded with fluorescent tracer particles (for flow measurements) or an organic dye (for contaminant concentration measurements). Microscopic measurements of contaminant concentration, contaminant velocity, and pore geometry were obtained in a full three-dimensional volume of the test section at a good accuracy and a high resolution. Three dimensional plots of these measurements show the complex geometry of the porous medium. It is also seen that near the contaminant front there is a significant correlation between the flow and the contaminant concentration. The goal is to use these and future results toward better understanding of contaminant flow and transport through natural porous media.
© (1995) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Mehdi Rashidi, "Simulation of contaminant flow in a laboratory-scale porous system", Proc. SPIE 2504, Environmental Monitoring and Hazardous Waste Site Remediation, (9 October 1995); doi: 10.1117/12.224137; https://doi.org/10.1117/12.224137
PROCEEDINGS
9 PAGES


SHARE
Back to Top