3 July 1995 Amorphous stuctured Ta4B absorber on SiC membrane for x-ray mask
Author Affiliations +
Abstract
Stress controllability, stress distribution and radiation stability of Ta4B absorber film on SiC membrane were investigated in detail. A low stress Ta4B film was deposited on as-deposited SiC membrane with excellent reproducibility by an rf magnetron sputtering using Ar gas. Ta4B film with very low stress below 10 MPa and high thermal stability have been obtained by annealing. The film has amorphous structure and uniform stress distribution of +/- 2.5 MPa in a window area of 28 mm square. The Ta4B film has been found to show high durability against SR irradiation. SR-induced displacement (3(sigma) ) of 0.8-micrometers -thick Ta4B film on SiC membrane were X equals 29 and Y equals 24 nm after irradiation of 531 kJ/cm2, which were within the measurement error of 30 nm.
© (1995) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Tsutomu Shoki, Tsutomu Shoki, Ryo Ohkubo, Ryo Ohkubo, Gregory M. Wells, Gregory M. Wells, Yoichi Yamaguchi, Yoichi Yamaguchi, Kuniaki Yamazaki, Kuniaki Yamazaki, Franco Cerrina, Franco Cerrina, } "Amorphous stuctured Ta4B absorber on SiC membrane for x-ray mask", Proc. SPIE 2512, Photomask and X-Ray Mask Technology II, (3 July 1995); doi: 10.1117/12.212815; https://doi.org/10.1117/12.212815
PROCEEDINGS
6 PAGES


SHARE
RELATED CONTENT

Analysis of x-ray mask distortion
Proceedings of SPIE (July 27 1997)
Status of x ray mask development at the IBM Advanced...
Proceedings of SPIE (August 31 1998)
X-ray phase mask: nanostructures
Proceedings of SPIE (July 06 1997)
0.35 um rule, high density, full chip x ray mask...
Proceedings of SPIE (June 23 1993)

Back to Top