Translator Disclaimer
Paper
3 July 1995 Photomask cleaning for high-density and embedded PSM
Author Affiliations +
Abstract
Photomask cleaning is getting important factor in whole mask process as device density is going to higher and introducing of P.S.M. Not only hard defect but contamination defects both on Qz and the Cr areas of photomask reticle can make problems on wafer. Especially contamination defect on the Cr of embedded type P.S.M. can cause the undesirable phase shift effect. Current method of photomask cleaning is not so improved compared to other areas of mask manufacturing. New technology of cleaning will be developed in near future but we try to figure out the limit of current cleaning method and maximize the current cleaning performance.
© (1995) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Cheol Shin, Yung-Sung Son, and Ki Jong Kim "Photomask cleaning for high-density and embedded PSM", Proc. SPIE 2512, Photomask and X-Ray Mask Technology II, (3 July 1995); https://doi.org/10.1117/12.212811
PROCEEDINGS
9 PAGES


SHARE
Advertisement
Advertisement
RELATED CONTENT

NXE pellicle offering a EUV pellicle solution to the...
Proceedings of SPIE (March 18 2016)
Pellicle Protection Of Integrated Circuit (IC) Masks
Proceedings of SPIE (July 28 1981)
Cleaning and pelliclization
Proceedings of SPIE (January 01 1994)
Recent advances in prepellicle mask cleaning
Proceedings of SPIE (June 01 1990)
Advanced photomask cleaning
Proceedings of SPIE (December 06 2004)
Use of excimer laser test system for studying haze growth
Proceedings of SPIE (November 08 2005)

Back to Top