15 September 1995 Photoresponse and electroresponse of polymer light-emitting diodes
Author Affiliations +
Abstract
We have studied the photoresponse and electroresponse of light emitting diodes (LEDs) made from a variety of soluble conducting polymers sandwiched between indium tin oxide (ITO) and metals including calcium, aluminum and copper. Under illumination all freshly prepared LEDs exhibit relatively large photoconductive current-voltage (I-V) responses which cross the dark I-V curve at a forward-bias voltage V0 that scales with the difference in the work functions between the ITO and metal electrodes. This causes the open-circuit voltage to easily saturate at V0 and consequently to be temperature independent, in contrast to the properties of the photovoltaic effect exhibited by conventional Schottky-barrier type photodiodes. Some LEDs, prepared under less ideal conditions exhibit I-V curve, electroluminescence (EL) intensity-voltage (IEL-V) curve, an EL spectra identical in forward and reverse bias. The I-V curves were also symmetric under illumination, with I approximately equal to 0 at V equals 0, suggesting a negligibly small internal electric field. These diodes are discussed in relation to Fermi-level pinning at defect states in the interfaces between the polymer and the electrodes.
© (1995) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Z. Valy Vardeny, Z. Valy Vardeny, Xing Wei, Xing Wei, Stefan A. Jeglinski, Stefan A. Jeglinski, } "Photoresponse and electroresponse of polymer light-emitting diodes", Proc. SPIE 2528, Optical and Photonic Applications of Electroactive and Conducting Polymers, (15 September 1995); doi: 10.1117/12.219551; https://doi.org/10.1117/12.219551
PROCEEDINGS
10 PAGES


SHARE
Back to Top