11 August 1995 Design considerations for the OMEGA upgrade final focus lens
Author Affiliations +
The development ofmodem optical instruments has evolved into a complex multi-disciplinary activity with the explosion of sophisticated applications. For specialized optical systems, the development ofeven a prototype has become a costly exercise. This paper presents a new concept of virtual prototyping for optical systems to minimize the development time, cost and risk. This process employs the computer-aided design and modeling tools to address the broad issues of system layout, optical and optomechanical design, structural and thermal analysis for the real operating environment, tolerance budgeting and optimization procedures. The Center for Applied Optics (CAO) at the University of Alabama in Huntsville (UAH) has developed the necessary computer interfaces between the various stages of optical system design, development and evaluation. As a common thtabase is used for the optical and mechanical design and analyses, the possibility ofa human error is eliminated while minimizing the time and effort required to accomplish these critical tasks. The virtual prototyping concept works in an iterative fashion to achieve the desired system performance at a minimum cost. This technique has been successfully employed in the design and development of several optical instruments for space, military and commercial applications, covering a broad spectrum from Uv to JR The performance specifications and the results of virtual prototyping for some typical systems are also presented. Keywords: Virtualprototyping, computer-aided design andmodeling, optomechanical design, tolerance analysis, optimization
© (1995) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Christopher T. Cotton, Christopher T. Cotton, } "Design considerations for the OMEGA upgrade final focus lens", Proc. SPIE 2537, Novel Optical Systems Design and Optimization, (11 August 1995); doi: 10.1117/12.216394; https://doi.org/10.1117/12.216394


Source of contamination in damage-test sample and vacuum
Proceedings of SPIE (August 08 2016)
Optical Components For The SHIVA Laser
Proceedings of SPIE (May 03 1978)
Very High Reflectivity Supermirrors And Their Applications
Proceedings of SPIE (January 17 1989)
Study on anti-laser high-reflection coating
Proceedings of SPIE (November 13 2007)
Beam Transport Optics For Laser Fusion
Proceedings of SPIE (January 19 1978)

Back to Top