2 August 1995 Behavior of various cracks in the machining of glass
Author Affiliations +
Proceedings Volume 2576, International Conference on Optical Fabrication and Testing; (1995) https://doi.org/10.1117/12.215624
Event: International Conferences on Optical Fabrication and Testing and Applications of Optical Holography, 1995, Tokyo, Japan
Today, high quality free-from-crack surfaces of brittle materials are expected to be machined by ductile mode chip formation. Firstly, abrasions and cracks formed on or beneath the machined surface were observed through turning tests with diamond cutting tools and it was discussed that the crack-free machining of glass would be possible. Secondly, the turning tests of glass with single crystal diamond conical indenters, tip radius of which are 5, 10 and 100 micrometers respectively, were performed for the purpose of investigating the criteria for crack- free chip formation, especially paying attention to the effect of indenter's tip radius. As a result, some crack-free grooves formed on the glass surface were observed, and it was concluded that one of the most important factors for ductile mode chip formation is the radius of tip curvature and suppression of a median crack.
© (1995) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Junji Shibata, Junji Shibata, } "Behavior of various cracks in the machining of glass", Proc. SPIE 2576, International Conference on Optical Fabrication and Testing, (2 August 1995); doi: 10.1117/12.215624; https://doi.org/10.1117/12.215624

Back to Top