15 December 1995 Calibration of an inertial reference system (IRS) using the ground return of a Doppler lidar
Author Affiliations +
Abstract
For the measurement of the wind field from a moving platform one big challenge is the elimination of the Doppler shift due to platform motion. If the housekeeping data (platform velocity and attitude) are not accurate enough, a calibration to the ground return of the lidar is a possible solution. This presentation deals with the advantages and problems of such a procedure at the example of measurements obtained with the airborne Doppler lidar ADOLAR. Here a rectangular flight pattern from October 13, 1994 over the Nordsee is discussed together with the possibility of using this technique at a satellite.
© (1995) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Stephan Rahm, Stephan Rahm, P. Knott, P. Knott, Engelbert Nagel, Engelbert Nagel, } "Calibration of an inertial reference system (IRS) using the ground return of a Doppler lidar", Proc. SPIE 2581, Lidar Techniques for Remote Sensing II, (15 December 1995); doi: 10.1117/12.228514; https://doi.org/10.1117/12.228514
PROCEEDINGS
4 PAGES


SHARE
RELATED CONTENT

AEOLUS mission: the latest preparations before launch
Proceedings of SPIE (September 28 2017)
ADM-Aeolus follow-on missions
Proceedings of SPIE (October 16 2007)

Back to Top