15 January 1996 Mechanical behavior of coated fused silica optical fibers aged at elevated temperature in air and filling compound
Author Affiliations +
Proceedings Volume 2611, Optical Network Engineering and Integrity; (1996) https://doi.org/10.1117/12.230096
Event: Photonics East '95, 1995, Philadelphia, PA, United States
Abstract
In this report, we present an experimental analysis of the mechanical behavior of fused silica standard telecommunication fibers aged in hot air and hot filling compound. Our measurements at standard room temperature conditions after the aging treatments indicated tensile strength increases of up to 5% at 85 degrees Celsius and 15% in filling compound after one- to six-month aging. The dynamic fatigue for the fibers aged in the filling compound also improved (n-values from 17 - 20 to 25 - 30) in parallel with the fiber strength while the fiber static fatigue tests gave large n-value increases from 30 to 140. In order to examine the effects of the aging treatments on the fiber coatings, we used dynamic mechanical analysis to measure the coating mechanical properties, storage modulus E' and loss tangent tan (delta) . In general, we have found that aging in hot air and in the filling compound results in a significant decrease in E' and increase in tan (delta) , thereby suggesting an aging-related increase in the capacity of the coating to absorb substantial amounts of mechanical energy. A qualitative theoretical analysis of the coating contribution to the fiber crack growth and mechanical behavior in conjunction with our experimental results suggests that the coatings' ability to absorb more mechanical energy during aging contributes to increased fiber strength and improved fatigue behavior. Thus, our results to date provide the first experimental evidence that a fiber coating can stabilize cracks on fused silica surfaces and contribute in a significant way to fiber mechanical behavior.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Tarja T. Volotinen, Tarja T. Volotinen, Osman S. Gebizlioglu, Osman S. Gebizlioglu, } "Mechanical behavior of coated fused silica optical fibers aged at elevated temperature in air and filling compound", Proc. SPIE 2611, Optical Network Engineering and Integrity, (15 January 1996); doi: 10.1117/12.230096; https://doi.org/10.1117/12.230096
PROCEEDINGS
16 PAGES


SHARE
RELATED CONTENT

Stress free aging of optical fiber in water and humid...
Proceedings of SPIE (February 24 1993)
Short-Time Optical Fiber Thermal Conductivity Sensor
Proceedings of SPIE (January 31 1989)
Water tests on optical fibers
Proceedings of SPIE (December 28 1999)

Back to Top