15 January 1996 Mechanical behavior of silica optical fibers coated with low-index low-surface energy perfluorinated polymer
Author Affiliations +
Proceedings Volume 2611, Optical Network Engineering and Integrity; (1996) https://doi.org/10.1117/12.230099
Event: Photonics East '95, 1995, Philadelphia, PA, United States
Abstract
Two formulations based on perfluorinated polymer were prepared for use as UV-curable optical cladding for silica fibers. In the first formulation an adhesion promoting agent based on fluoroacrylate resin was synthesized and mixed with the experimental product Defensa 7702++ in order to promote wetting and chemical adhesion to the silica fibers. In the second formulation, wetting and physical adhesion between the liquid coating and the silica fibers were achieved by increasing the viscosity of the starting coating by addition of unsaturated perfluorinated polymer into Defensa. Both formulations were used as primary coatings on dual coated silica optical fibers. The mechanical behavior of the formulations was characterized by the strip test, the pull-out test and zero stress aging in 90 degrees Celsius pH 7 buffer. The results show that both formulations exhibit better wetting-adhesion characteristics than unmodified starting coating and that the strength degradation during zero- stress aging was lower for the fiber coated with the formulation of higher viscosity.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Anna B. Wojcik, Anna B. Wojcik, M. John Matthewson, M. John Matthewson, Lisa C. Klein, Lisa C. Klein, Paul R. Foy, Paul R. Foy, Elias Snitzer, Elias Snitzer, Ka Pak Wong, Ka Pak Wong, } "Mechanical behavior of silica optical fibers coated with low-index low-surface energy perfluorinated polymer", Proc. SPIE 2611, Optical Network Engineering and Integrity, (15 January 1996); doi: 10.1117/12.230099; https://doi.org/10.1117/12.230099
PROCEEDINGS
7 PAGES


SHARE
RELATED CONTENT


Back to Top