Paper
15 January 1996 Strength and surface characterization of aluminum-coated fused silica fibers
Author Affiliations +
Proceedings Volume 2611, Optical Network Engineering and Integrity; (1996) https://doi.org/10.1117/12.230100
Event: Photonics East '95, 1995, Philadelphia, PA, United States
Abstract
Hermetic aluminum-coated fused silica fibers can withstand high stress levels without failure for prolonged periods of time in water-containing environments. Aluminum-coated fibers from several sources exhibit differences in strength. The aluminum and silica surfaces have been examined using SEM and AFM in order to understand this variation. Differences in the interfacial interaction between aluminum and glass and in the microstructure of the coatings were considered, but were not unequivocally identified as being responsible for the differences in strength observed for the various aluminum-coated specimens.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yunn-Shin Shiue, M. John Matthewson, Charles R. Kurkjian, and Dipak R. Biswas "Strength and surface characterization of aluminum-coated fused silica fibers", Proc. SPIE 2611, Optical Network Engineering and Integrity, (15 January 1996); https://doi.org/10.1117/12.230100
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Aluminum

Fiber coatings

Optical fibers

Glasses

Scanning electron microscopy

Optical coatings

Tin

Back to Top