Translator Disclaimer
Paper
18 August 1995 Machine vision system for high-speed discrete parts inspection
Author Affiliations +
Proceedings Volume 2622, Optical Engineering Midwest '95; (1995) https://doi.org/10.1117/12.216858
Event: Optical Engineering Midwest '95, 1995, Chicago, IL, United States
Abstract
We have developed a vision application using the IDASTM (imaging development and applciation system) real-time image processing system to inspect discrete stamped metal parts. Specifically, the stamped clutch plates coming through the manufacturing line at speeds higher than 6000 parts per hour are to be inspected for defects on both surfaces of the clutch plate as well as defects on the profile of the clutch plate with dimensional accuracy in mils. The conventional area scan approach will not be practical die to the resolution requirements and the processing speed. We have developed a solution based on a 2048 CCD linescan camera and a conveyor system to transport the plates under the camera. This real-time multitasking system deals with all the complexities one normally encounters during the implementation of a real-time machine vision system. This paper will describe the application and the design strategies that made the solution both practical and economical.
© (1995) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Sateesha G. Nadabar, Hazem M. Hajj, and Reddiar S. Anbalagan "Machine vision system for high-speed discrete parts inspection", Proc. SPIE 2622, Optical Engineering Midwest '95, (18 August 1995); https://doi.org/10.1117/12.216858
PROCEEDINGS
9 PAGES


SHARE
Advertisement
Advertisement
Back to Top