Thermal microactuators for surface-micromachining processes

John H. Comtois; Victor M. Bright; Mark W. Phipps

doi:10.1117/12.221154

15 September 1995 Thermal microactuators for surface-micromachining processes

John H. Comtois, Victor M. Bright, Mark W. Phipps

Proceedings Volume 2642, Micromachined Devices and Components; (1995) https://doi.org/10.1117/12.221154
Event: Micromachining and Microfabrication, 1995, Austin, TX, United States

Abstract

Microelectromechanical systems must include large-deflection actuators to create devices which can interact mechanically with their surroundings. Electrostatic actuators with large nonresonant motion require high voltages and large surface areas to produce useful forces. Large-deflection thermal actuators have been fabricated in electroplated metal processes, but the choice of materials is limited, and the high conductivity of metal means these devices need a high current to generate the required heat. Thus, there is a need for a low voltage actuator with a large nonresonant deflection which can be fabricated in integrated circuit compatible surface-micromachining processes. The device described in this paper has a simple, flexible, and reliable design which overcomes the limitations of other actuators. It is a low voltage, medium current thermal actuator which can be designed to move laterally in a controllable, nonresonant motion. Typical actuators are 200 micrometers long, 18 micrometers wide, and deflect 10 micrometers at the tip with a drive current of 5 mA at 5 volts. A wide range of layout geometries allows this type of actuator to be fabricated in any surface-micromachining process that includes a releasable, current-carrying layer. An empirical model is presented to describe the devices fabricate in a commercially available surface-micromachining process. Arrays of actuators were fabricated to test the effect of different device dimensions on maximum achievable deflection as a funciton of applied current. Actuators can be combined to produce more force and have been integrated with other micromechanical structures. Applications of these actuators include linear and rotating motors, compliant micromechanisms, latches, micro-relays, variable capacitators and tweezers.

Citation Download Citation

John H. Comtois, Victor M. Bright, and Mark W. Phipps "Thermal microactuators for surface-micromachining processes", Proc. SPIE 2642, Micromachined Devices and Components, (15 September 1995); https://doi.org/10.1117/12.221154

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available