We address the application of model-supported exploitation techniques to synthetic aperture radar (SAR) imagery. The emphasis is on monitoring SAR imagery using wide area 2D and/or 3D site models along with contextual information. We consider here the following tasks useful in monitoring: (a) site model construction using segmentation and labeling techniques, (b) target detection, (c) target classification and indexing, and (d) SAR image-site model registration. The 2-D wide area site models used here for SAR image exploitation differ from typical site models developed for RADIUS applications, in that they do not model specific facilities, but constitute wide area site models of cultural features such as urban clutter areas, roads, clearings, fields, etc. These models may be derived directly from existing site models, possibly constructed from electro-optical (EO) observations. When such models are not available, a set of segmentation and labeling techniques described here can be used for the construction of 2D site models. The use of models can potentially yield critical information which can disambiguate target signatures in SAR images. We address registration of SAR and EO images to a common site model. Specific derivations are given for the case of registration within the RCDE platform. We suggest a constant false alarm rate (CFAR) detection scheme and a topographic primal sketch (TPS) based classification scheme for monitoring target occurrences in SAR images. The TPS of an observed target is matched against candidate targets TPSs synthesized for the preferred target orientation, inferred from context (e.g. road or parking lot targets). Experimental results on real and synthetic SAR images are provided.