1 December 1995 Comparative evaluation of the performance of passive and active 3D vision systems
Author Affiliations +
Proceedings Volume 2646, Digital Photogrammetry and Remote Sensing '95; (1995) https://doi.org/10.1117/12.227862
Event: Digital Photogrammetry and Remote Sensing '95, 1995, St. Petersburg, Russian Federation
Automated digital photogrammetric systems are considered to be passive three-dimensional vision systems since they obtain object coordinates from only the information contained in intensity images. Active 3-D vision systems, such as laser scanners and structured light systems obtain the object coordinates from external information such as scanning angle, time of flight, or shape of projected patterns. Passive systems provide high accuracy on well defined features, such as targets and edges however, unmarked surfaces are hard to measure. These systems may also be difficult to automate in unstructured environments since they are highly affected by the ambient light. Active systems provide their own illumination and the features to be measured so they can easily measure surfaces in most environments. However, they have difficulties with varying surface finish or sharp discontinuities such as edges. Therefore each type of sensor is more suited for a specific type of objects and features, and they are often complementary. This paper compares the measurement accuracy, on various type of features, of some technologically-different 3-D vision systems: photogrammetry-based (passive) systems, a laser scanning system (active), and a range sensor using a mask with two apertures and structured light (active).
© (1995) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Sabry F. El-Hakim, Sabry F. El-Hakim, J. Angelo Beraldin, J. Angelo Beraldin, Francois Blais, Francois Blais, } "Comparative evaluation of the performance of passive and active 3D vision systems", Proc. SPIE 2646, Digital Photogrammetry and Remote Sensing '95, (1 December 1995); doi: 10.1117/12.227862; https://doi.org/10.1117/12.227862


Optical character and calibration of 3D vision sensor
Proceedings of SPIE (October 09 2013)
Efficient measurement of stereoscopic 3D video content issues
Proceedings of SPIE (February 02 2014)
Design of a multisensor optical surface scanner
Proceedings of SPIE (October 05 1994)
Measurement and stitching of regular cloud of points
Proceedings of SPIE (August 28 2008)
Trinocular stereo vision method based on mesh candidates
Proceedings of SPIE (October 11 2010)

Back to Top