You have requested a machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Neither SPIE nor the owners and publishers of the content make, and they explicitly disclaim, any express or implied representations or warranties of any kind, including, without limitation, representations and warranties as to the functionality of the translation feature or the accuracy or completeness of the translations.
Translations are not retained in our system. Your use of this feature and the translations is subject to all use restrictions contained in the Terms and Conditions of Use of the SPIE website.
3 November 1995Displacement interferometer of cylindrical information carrier
An interferometric technique of a position and beating control for an axial rotating body position is described in this paper. A Michelson interferometer without a signal spectrum transfer in a high-frequency range is used as a position and beating sensor of a rotating body. An autocollimator as a reflector insensible to angular rotating is used in a measuring level of the interferometer. The autocollimator is tightly connected with a cylindrical information carrier by a magnet lock for motion dynamics investigations. It is found that the position error of the proposed position sensor does not exceed (lambda) /8.
The alert did not successfully save. Please try again later.
Michael Y. Kolesnikov, Viacheslav V. Petrov, Vitaly V. Pitsyuga, Igor V. Kosyak, "Displacement interferometer of cylindrical information carrier," Proc. SPIE 2648, International Conference on Optical Diagnostics of Materials and Devices for Opto-, Micro-, and Quantum Electronics, (3 November 1995); https://doi.org/10.1117/12.226174