5 March 1996 Near-sensor real-time imaging spectroscopy for industrial applications
Author Affiliations +
Abstract
In this paper we present a system for high speed pixelwise spectral classification. The system is based on the line imaging PGP (prism-grating-prism) spectrograph combined with the smart image sensor MAPP2200. The classification is implemented using a near-sensor approach where linear discriminant functions are calculated using exposure time modulation and analog summation of pixel data. After A/D-conversion the sums are compared and classified pixels are output from the sensor chip. The theoretical maximum classified pixel rate of the system is around 1 MHz depending on number of classes, etc. In most practical applications however, the limit will be set by the available amount of light.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Erik Astrand, Erik Astrand, Mats Osterberg, Mats Osterberg, Anders Astrom, Anders Astrom, } "Near-sensor real-time imaging spectroscopy for industrial applications", Proc. SPIE 2661, Real-Time Imaging, (5 March 1996); doi: 10.1117/12.234648; https://doi.org/10.1117/12.234648
PROCEEDINGS
12 PAGES


SHARE
Back to Top