15 April 1996 Improving display quality by a digital convergence correction system for multibeam CRTs
Author Affiliations +
Abstract
In the field of medical imaging there is a need for high-resolution high-brilliance monochromatic CRT displays. However, at higher brightness levels the resolution of these displays decreases, due to the increasing spot size. In order to improve the performance of the CRT display a relatively simple method, called the multi-beam concept, is introduced. Using this technique a higher brightness can be realized without an increase of the spot size and therefore a better display quality can be achieved. However, for successful exploitation of the multi-beam concept it is necessary to minimize the convergence error of the CRT display. For this purpose two circuits have been realized, where the convergence error is reduced by an analogue and a digital method respectively. The analogue implementation means an improvement for the applicability of the multi-beam concept, however, in order to achieve major image quality improvement the use of the digital system is necessary.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
J. K. Patrick Barels, J. K. Patrick Barels, Albert F. Lubbers, Albert F. Lubbers, Cornelis H. Slump, Cornelis H. Slump, Rudolf Kemner, Rudolf Kemner, Aartjan Hoeven, Aartjan Hoeven, } "Improving display quality by a digital convergence correction system for multibeam CRTs", Proc. SPIE 2707, Medical Imaging 1996: Image Display, (15 April 1996); doi: 10.1117/12.238487; https://doi.org/10.1117/12.238487
PROCEEDINGS
9 PAGES


SHARE
RELATED CONTENT


Back to Top