Paper
1 March 1996 Determination of critical characteristics of gas jet under finishing laser cutting
Ch. Sipavichyus, P. Vaitiekunas, E. Milutis
Author Affiliations +
Proceedings Volume 2713, Fifth International Conference on Industrial Lasers and Laser Applications '95; (1996) https://doi.org/10.1117/12.234198
Event: Fifth International Conference on Industrial Laser and Laser Applications '95, 1995, Shatura, Moscow, Russian Federation
Abstract
In the calculations the method of finite volumes with program packet PHOENICS 1.4 was applied. Elliptical transfer equations with standard model of turbulence were numerically solved. Three cases of flow around flat obstacle were investigated. Comparison of evaluated flow rate, pressure and turbulence energy when flowing around the plate with or without a hole was done. Highest possible values of flow rate on the symmetry axis of the system in the case of continuous hole in the obstacle were estimated. Activity of the jet in the cross-sections of nozzle outlet-obstacle and in the periphery above obstacle surface was proven. Analysis of obtained results shows the activity of introduced investigation and abilities to employ its results in projecting of conic nozzles.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ch. Sipavichyus, P. Vaitiekunas, and E. Milutis "Determination of critical characteristics of gas jet under finishing laser cutting", Proc. SPIE 2713, Fifth International Conference on Industrial Lasers and Laser Applications '95, (1 March 1996); https://doi.org/10.1117/12.234198
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Turbulence

Laser cutting

Laser processing

Laser applications

Metals

Gas lasers

Laser drilling

RELATED CONTENT


Back to Top