30 May 1996 In-situ self-sensing fiber reinforced composites
Author Affiliations +
Abstract
This paper discusses the development of a novel composite system where some of the reinforcing fibers act as the light guide. High purity silica reinforcing fibers with a diameter of 9 micrometer were used along with an appropriate cladding material to produce a light guide, which was termed a 'self-sensing' fiber. Self-sensing fibers were embedded within a 16-ply carbon fiber reinforced composite and the resultant panels were impact tested to examine the possibility of using the self-sensing fibers as an impact damage sensor (crack detector). Similarly, three types of conventional optical fibers, with outer diameters of 30 micrometer, 50 micrometer, and 125 micrometer were also embedded within composite panels. These were also impact tested to ascertain their effectiveness as crack detectors. Results indicate that the self-sensing fibers are capable of detecting impact damage as low as 2 J and proved to be more sensitive to impact damage than the other types of fiber investigated in this study.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Simon A. Hayes, David Brooks, Tonguy Liu, S. Vickers, Gerard Franklyn Fernando, "In-situ self-sensing fiber reinforced composites", Proc. SPIE 2718, Smart Structures and Materials 1996: Smart Sensing, Processing, and Instrumentation, (30 May 1996); doi: 10.1117/12.240877; https://doi.org/10.1117/12.240877
PROCEEDINGS
9 PAGES


SHARE
RELATED CONTENT

Planarized fiber-FHD optical composite
Proceedings of SPIE (April 17 2015)
Aging behavior of optical fibers in aqueous environments
Proceedings of SPIE (September 10 2004)
Coatings for Optical Fibers
Proceedings of SPIE (April 15 1986)
Quartz and E-glass fiber self-sensing composites
Proceedings of SPIE (April 16 1998)

Back to Top