Paper
1 May 1996 Active chatter supression in an octahedral hexapod milling machine: a design study
Author Affiliations +
Abstract
This paper describes a design study to determine the feasibility of integrating active control into a milling machine to enhance milling-process performance. The study described herein focuses on the active suppression of chatter instabilities in an Octahedral Hexapod Milling (OHM) machine. Structural dynamics contributing to chatter instabilities were described using calibrated finite element models, which were coupled with a tool-workpiece interaction model for purposes of determining, by simulation, machine performance enhancement due to active control. An active vibration control design to minimize vibration at the tool tip was also integrated into the simulation. Active control subcomponent and actuator size requirements were determined from the modeling and simulations. The study showed that active control is a feasible solution for suppressing chatter instabilities, allowing the metal removal rate of the OHM machine to be increased by roughly a factor of two.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jeffrey L. Dohner, Chi-Man Kwan, and Mark E. Regelbrugge "Active chatter supression in an octahedral hexapod milling machine: a design study", Proc. SPIE 2721, Smart Structures and Materials 1996: Industrial and Commercial Applications of Smart Structures Technologies, (1 May 1996); https://doi.org/10.1117/12.239144
Lens.org Logo
CITATIONS
Cited by 22 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Actuators

Spindles

Metals

Ceramics

Data modeling

Finite element methods

Solid state physics

Back to Top