Paper
1 May 1996 Feasibility study concerning optical fiber sensor vibration monitoring subsystem
James R. Dunphy
Author Affiliations +
Abstract
This paper reports on the results of a feasibility study concerning optical fiber Bragg grating sensors for vibration monitoring. The fiber grating sensors were embedded in glass-reinforced epoxy and graphite-reinforced PEEK active mount structures developed by the SPICES Consortium. The fiber sensors were interfaced to controllers by an acousto-optic tuned filter based instrument that provided simultaneous, real time, dynamic strain signals from 4 wavelength multiplexed sensors with a resolution of 0.002 microstrain per root Hz and a bandwidth of 4 kHz. The sensor interface design and performance are presented.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
James R. Dunphy "Feasibility study concerning optical fiber sensor vibration monitoring subsystem", Proc. SPIE 2721, Smart Structures and Materials 1996: Industrial and Commercial Applications of Smart Structures Technologies, (1 May 1996); https://doi.org/10.1117/12.239155
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Fiber optics sensors

Filtering (signal processing)

Optical filters

Electronic filtering

Spectroscopy

Calibration

Back to Top