14 June 1996 Effect of low-molecular-weight dissolution-promoting compounds in DNQ-novolac positive resist
Author Affiliations +
Abstract
Effects of a dissolution promoter (DP) on the lithographic behavior of DNQ-novolac resists were investigated. The key structure/property relationships of the DP in relation to other parameters of the resist components were identified. In this work, we observed: (1) A significant improvement in resolution and photospeed when the DP was appropriately used. (2) Improvements in resist profile to increase its steepness. (3) Novolac dispersivity was the key for obtaining a beneficial effect from DP incorporation into the resist matrix. (4) Molecular size of the DP influenced resist resolution. (5) The PEB process effectively acts to improve dissolution discrimination. The dissolution rate analysis indicated that the DP incorporation, when optimized, accelerated dissolution of exposed resist film while decreasing the dissolution rate of unexposed film. This results in resolution improvement by increasing the dissolution contrast. DP also enhanced the surface induction in the resist film dissolution, which resulted in improvement of the profile steepness. We are proposing a 'selective dissolution model' to account for the influence of the DP to the resist dissolution. This model assumes a critical dissolution rate differentiation between the DP and the other components, i.e., a microscopically uneven dissolution of the resist film components at the dissolution front, which leads to the above unique dissolution behavior. PAC or DP diffusion in the resist film were found to be critical in obtaining the discussed DP effect in a real resist film.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yasumasa Kawabe, Shiro Tan, Fumiyuki Nishiyama, Shinji Sakaguchi, Tadayoshi Kokubo, Andrew J. Blakeney, Lawrence Ferreira, "Effect of low-molecular-weight dissolution-promoting compounds in DNQ-novolac positive resist", Proc. SPIE 2724, Advances in Resist Technology and Processing XIII, (14 June 1996); doi: 10.1117/12.241841; https://doi.org/10.1117/12.241841
PROCEEDINGS
18 PAGES


SHARE
RELATED CONTENT

Influence of post exposure bake on resist contrast
Proceedings of SPIE (May 16 1994)
A New Two-Layer Photoresist.
Proceedings of SPIE (July 09 1986)
Unique spin coat process for positive photoresists
Proceedings of SPIE (June 09 1995)
Parameter investigation of PEB sensitivity
Proceedings of SPIE (March 29 2006)

Back to Top