Paper
30 May 1996 Sunlight-readable display technology: a dual-use case study
Randall D. Blanchard
Author Affiliations +
Abstract
This paper describes our vision of sunlight readable color display requirements, an alternate technology that offers a high level of performance, and how we implemented it for the military avionics display market. This knowledge base and product development experience was then applied with a comparable level of performance to commercial applications. The successful dual use of this technology for these two diverse markets is presented. Details of the technical commonality and a comparison of the design and performance differences are presented. A basis for specifying the required level of performance for a sunlight readable full color display is discussed. With the objective of providing a high level of image brightness and high ambient light rejection, a display architecture using collimated light is used. The resulting designs of two military cockpit display products, with contrast ratios above 20:1 in sunlight are shown. The performance of a commercial display providing several thousand foot- Lamberts of image brightness is presented.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Randall D. Blanchard "Sunlight-readable display technology: a dual-use case study", Proc. SPIE 2734, Cockpit Displays III, (30 May 1996); https://doi.org/10.1117/12.241019
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Military display technology

LCDs

Flat panel displays

Lamps

Collimation

CRTs

Display technology

Back to Top