Paper
28 July 1981 Laser Scanning Autoalignment In Projection System
Akiyoshi Suzuki
Author Affiliations +
Abstract
Automatic alignment by laser beam scanning method is known as a useful technique for both contact and proximity printing, and is now put in practical use. This method utilizes a laser spot as an optical probe which detects the information of a mask and a wafer simultaneously. Laser beam forms a small spot on the objects, and scans them at a constant velocity by a rotating polygonal mirror and F-θ optical systems. The alignment marks on the objects are placed along the scanning line. In order to increase the signal-to-noise ratio of the object information, a part of the scattered light from the marks is selectively detected by optical filtering method. As a result, high detectability of wafers information and highly accurate automatic alignment can be achieved. This laser spot scanning method is easily applied to the projection printing aligners too, such as lens or mirror system. It has an advantage to make full use of the characteristics of the projection system. For example, the interference phenomena between a mask and a wa-fer can be eliminated by the use of a quarter-wave plate or phase-shift mirrors in combination with the polarization characteristics of a laser. Cosequently, stable output signals are obtained, and the alignment accuracy is improved to 0.3μm (2σ).
© (1981) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Akiyoshi Suzuki "Laser Scanning Autoalignment In Projection System", Proc. SPIE 0275, Semiconductor Microlithography VI, (28 July 1981); https://doi.org/10.1117/12.931871
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Semiconducting wafers

Projection systems

Signal detection

Photomasks

Mirrors

Laser scanners

Light scattering

RELATED CONTENT

VLSI Lithography Using Canon 1:1 Wafer Stepper
Proceedings of SPIE (November 07 1983)
Industry User Forum Use Of Off Contact Printing In...
Proceedings of SPIE (March 01 1974)
Electronic image adjustment device for e-beam lithography
Proceedings of SPIE (October 25 1996)
Mix And Match Of 10 1 Wafer Steppers With Die...
Proceedings of SPIE (September 13 1982)

Back to Top