12 June 1996 Attenuation and diffraction measurements of shear acoustic waves in GaP above 4 GHz
Author Affiliations +
Abstract
GaP with shear acoustic mode in (110) direction is one of the few acousto-optic materials which are practical for the AO devices operating above several GHz frequencies. Low acoustic attenuation, low acoustic non-linearity, and high AO figure of merit of this mode in GaP provides remarkably large time-bandwidth products with small apertures and high enough diffraction efficiencies. In addition, the self- collimating (or low diffraction spreading) orientation of this mode in GaP allows selection of a smaller transducer height to improve further the AO diffraction efficiency and to increase the optical throughput with smaller channel spacing in multi-channel Bragg cells. Acoustic diffraction spreading and attenuation measurement in a shear mode GaP AO device operating at 4.2 GHz are reported here. Negligible acoustic beam diffraction spreading in this device allowed us to deduce accurate attenuation data for the shear mode. We measured 1.88 dB/cm-GHz2 or 0.77 dB/microsecond- GHz2 acoustic attenuation for this mode.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Manhar L. Shah, "Attenuation and diffraction measurements of shear acoustic waves in GaP above 4 GHz", Proc. SPIE 2754, Advances in Optical Information Processing VII, (12 June 1996); doi: 10.1117/12.243119; https://doi.org/10.1117/12.243119
PROCEEDINGS
6 PAGES


SHARE
RELATED CONTENT

3 GHz bandwidth rutile Bragg cell
Proceedings of SPIE (September 27 2008)
Materials For Large Time Apurture Bragg Cell
Proceedings of SPIE (March 04 1986)
Ghz Gaas Acousto-Optic Modulator Devices
Proceedings of SPIE (September 24 1987)
Material Tradeoff for Wideband Bragg Cells
Proceedings of SPIE (March 04 1986)
TeO2 slow surface acoustic wave Bragg cell
Proceedings of SPIE (August 01 1991)

Back to Top