Translator Disclaimer
Paper
23 August 1996 Hybrid imaging element: possibilites of aberration correction
Author Affiliations +
Abstract
In the case of a single-element imaging system, aplanatic correction is of major importance. It can be achieved for single holographic lens, if recorded on a spherical surface. For this reason, however, a diffractive microstructure of high spatial frequency has to be recorded. From technological point of view, a combination of classic, glass lens giving most part of overall refractive power with a diffractive structure of relatively low spatial frequency acting as an aberration corrector seems to be more advantageous. In this paper the possibility of aplanatic correction if assuming that the object point is located in infinity and both refractive surfaces are spherical is analyzed.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Leon Magiera, Jerzy Nowak, and Marek Zajac "Hybrid imaging element: possibilites of aberration correction", Proc. SPIE 2774, Design and Engineering of Optical Systems, (23 August 1996); https://doi.org/10.1117/12.246663
PROCEEDINGS
11 PAGES


SHARE
Advertisement
Advertisement
RELATED CONTENT

Correction of aperture aberrations of hybrid lens
Proceedings of SPIE (January 01 1998)
Hybrid achromatic spectacle lens
Proceedings of SPIE (November 21 2003)
Simple achromatic hybrid lens
Proceedings of SPIE (November 21 2003)
Aplanatic correction of a hybrid lens
Proceedings of SPIE (August 11 1995)

Back to Top