Translator Disclaimer
26 August 1996 Reliability studies on a kilowatt-class XeCl laser
Author Affiliations +
Proceedings Volume 2788, High-Power Lasers: Gas and Solid State Lasers; (1996)
Event: Lasers, Optics, and Vision for Productivity in Manufacturing I, 1996, Besancon, France
At the NCLR an industrial 1 kW XeCl excimer laser, delivering 1 J at 1 kHz, is under development. Particular emphasis is on reliable long-term operation with moderate operational and maintenance costs. The design challenges can be grouped into characteristic operational time durations. The initial step to scale a single shot laser to a kilohertz device concerns the attainment of a sufficient clearing ratio in the active gas. Furthermore, the optical quality of the laser gas must be maintained also at high frequencies, which requires a low degree of turbulence in the gas flow and minimization of shock waves generated by the discharge. Laser operation for several hours primarily demands a thermal management of all active components. In addition the gas quality needs to be maintained, which concerns the chemical composition, the amount of impurities and occurrence of dust in the gas. Finally, continued laser action for billions of shots puts tight requirements on the lifetimes of the gas, the electrodes, the mirrors and the excitation system. These issues are largely determined by proper choice of materials but to a major part also by the conceptual layout of the laser. Therefore, a choice of technology is required which is very different from the spark-preionized charge transfer excitation predominantly found in commercially available excimer lasers.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Thomas Hofmann, John C.M. Timmermans, Jacob Couperus, Frederik A. van Goor, and Wilhelmus J. Witteman "Reliability studies on a kilowatt-class XeCl laser", Proc. SPIE 2788, High-Power Lasers: Gas and Solid State Lasers, (26 August 1996);


Numbers Of Merit In Excimer Laser Reliability Analysis
Proceedings of SPIE (April 26 1989)
Super small excimer laser
Proceedings of SPIE (September 01 1991)

Back to Top