23 September 1996 CO2 laser tailored blank welding: process monitoring
Author Affiliations +
Proceedings Volume 2789, High-Power Lasers: Applications and Emerging Applications; (1996) https://doi.org/10.1117/12.251198
Event: Lasers, Optics, and Vision for Productivity in Manufacturing I, 1996, Besancon, France
Abstract
Tailored blank welding has been a rapidly growing segment of the automotive industry over the last five years. It allows to choose the optimal thickness of the sheets for different zones taking into account different mechanical stresses, vehicle safety reinforcement. Through the elimination of extra reinforcement parts, the use of tailored blanks allows to produce lighter car bodies and to simplify the production cycle. As more laser welding systems are being installed in industry, in order to increase the productivity and maintain constant quality of the products, the demand for the development of process monitoring systems increases. In this paper a monitoring system, based on the measurement of the radiation from the plasma plume during the CO2 tailored blanks laser welding, is presented. Using an appropriate combination of optical components, detectors and a special software, a complete apparatus has been developed. The signals were found to be correlated to weld quality parameters including the defects such as holes, overlapping and open butts.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Giuseppe D'Angelo, Giuseppe D'Angelo, Elena Borello, Elena Borello, Nereo Pallaro, Nereo Pallaro, } "CO2 laser tailored blank welding: process monitoring", Proc. SPIE 2789, High-Power Lasers: Applications and Emerging Applications, (23 September 1996); doi: 10.1117/12.251198; https://doi.org/10.1117/12.251198
PROCEEDINGS
7 PAGES


SHARE
RELATED CONTENT

Process Control During Laser Machining
Proceedings of SPIE (March 23 1989)
Acoustic Emission And Its Application To Laser Spot Welding
Proceedings of SPIE (October 25 1989)
On-line Nd:YAG laser welding process monitoring
Proceedings of SPIE (September 06 1994)

Back to Top