Translator Disclaimer
23 September 1996 Laser shock processing with small impacts
Author Affiliations +
Proceedings Volume 2789, High-Power Lasers: Applications and Emerging Applications; (1996) https://doi.org/10.1117/12.251170
Event: Lasers, Optics, and Vision for Productivity in Manufacturing I, 1996, Besancon, France
Abstract
Surface effects induced by small laser impacts on a 55C1 steel were investigated in terms of the compressive residual stresses, the surface geometries and the work hardenings generated by the process. it was demonstrated that laser shock processing with 1-2 mm spot-size range could provide at least as beneficial surface effects as larger ones but limited to about 0.8 mm in depth where as large impacts affected more than 1.2 mm at the same power densities. This latter point was ascribed to differences in the chock propagation mode: shock decay was shown to occur earlier in the case of small impacts because of 2D attenuations as confirmed by Lagrangian simulations.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Patrice Peyre, Remy Fabbro, Laurent Berthe, Xavier Scherpereel, and A. Le Cornec "Laser shock processing with small impacts", Proc. SPIE 2789, High-Power Lasers: Applications and Emerging Applications, (23 September 1996); https://doi.org/10.1117/12.251170
PROCEEDINGS
8 PAGES


SHARE
Advertisement
Advertisement
Back to Top