Translator Disclaimer
28 May 1997 High-speed imaging of Raleigh-Taylor instabilities in laser-driven plates
Author Affiliations +
Proceedings Volume 2869, 22nd International Congress on High-Speed Photography and Photonics; (1997)
Event: 22nd International Congress on High-Speed Photography and Photonics, 1996, Santa Fe, NM, United States
We have previously reported our observations of the dynamic behavior of laser driven plates. Recent improvements and modification of the imaging techniques have identified and provided measurements of Raleigh-Taylor (R-T) instabilities that occur in these events. The microscope system in the LLNL Micro Detonics Facility, was converted to an epi- illuminated polarization configuration. A double pulse nanosecond illuminator and a second independently focusable frame camera were also added to the system. A laser driven plate, that is a dense solid driven by a laser heated, lower density plasma, is inherently R-T unstable. The characteristics and growth of the instability determine whether or not the plate remains intact. In earlier reports we correlated the surface patterning of thin plates with the fiber-optical transmission modes. In subsequent experiments we noted that the plasma burn through patterning in thin plates and the surface patterning of thicker plates did not correspond to the thin plate early time patterning. These observations led to the suspicion of R-T instability. A series of experiments correlating plate thickness and pattern spatial frequency has verified the instability. The plates are aluminum, deposited on the ends of optical fibers. They are launched by a YAG laser pulse traveling down the fiber. Plate velocities are several kilometers per second and characteristic dimensions of the instabilities are a few to tens of microns. Several techniques were used to examine the plates, the most successful being specularly reflecting polarization microscopy looking directly at the plate as it flies toward the camera. These images gave data on the spatial frequencies of the instabilities but could not give the amplitudes. To measure the amplitude of the instability a semi-transparent witness plate was placed a known distance from the plate. As above, the plate was observed using the polarization microscope but using the streak camera as the detector. Both the launch of the plate and its impact into the witness plate are observed on the streak record. Knowing the plate velocity function from earlier velocimetry measurements and observing the variations in the arrival time across the plate, the amplitude of the instability can be calculated.
© (1997) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Alan M. Frank, Calvin H. Gillespie, and Wayne M. Trott "High-speed imaging of Raleigh-Taylor instabilities in laser-driven plates", Proc. SPIE 2869, 22nd International Congress on High-Speed Photography and Photonics, (28 May 1997);


Laser Plasma Damage To Multilayer Mirrors
Proceedings of SPIE (February 03 1988)
Microphotography of shocks in crystals
Proceedings of SPIE (December 31 1992)
Stop-motion microphotography of laser-driven plates
Proceedings of SPIE (October 13 1994)

Back to Top