Paper
30 September 1996 Preparation of a YBCO superconducting tape by pulsed laser deposition
Qiulang Wang, Chengwu An, You-qing Wang, Zaiguang Li
Author Affiliations +
Abstract
A high current density YBa2Cu3O7-x (YBCO) superconducting thick film on a flexible NiCr alloy substrate tape with ZrO2 + 10 percent Y2O3 (YSZ) as buffer layer was prepared by pulsed laser deposition. The buffer layer YSZ of thickness 0.3 micrometers was formed on the NiCr alloy substrate tape of length 6.0 cm by ion-assisted pulsed laser deposition. The YBCO superconducting thick film with thickness 1.5 micrometers was deposited on the YSZ/NiCr alloy substrate tape by a KrF laser. The x-ray diffraction pattern indicates that the YBCO superconducting thick film is with strongly C-axis oriented. The critical current densities versus temperature and magnetic field were measured by standard four-point probe method, the values of critical current density and the critical temperature of the YBCO/YSZ/NiCr alloy superconducting tape are 8.75 X 104 A/cm2 and 88.7 K, respectively.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Qiulang Wang, Chengwu An, You-qing Wang, and Zaiguang Li "Preparation of a YBCO superconducting tape by pulsed laser deposition", Proc. SPIE 2888, Laser Processing of Materials and Industrial Applications, (30 September 1996); https://doi.org/10.1117/12.253125
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Superconductors

Magnetism

Pulsed laser deposition

Thin films

Oxygen

X-ray diffraction

Temperature metrology

Back to Top