25 September 1996 Uncooled multispectral detectors and their applications
Author Affiliations +
The article describes the basic design and essential properties of developed multispectral detectors. The presented detector concept on the basis of lithium tantalate (LiTaO3), a pyroelectric material, makes the parallel measurement possible in four spectral channels in the wavelength range of typically 1 - 25 micrometers . The detector consists of an optical unit with the beam splitter and interference filters for the spatial and spectral dispersion of the incident total radiation and the responsive elements with appropriate low-noise preamplifiers. The detector is a discrete and compact component in a TO 8 transistor casing (empty set 14 mm X 10 mm) with an aperture of typically empty set 2 mm. Essential properties of a four-channel detector for the gas analysis (CO; CO2; HC; REF) are described and the influence of the beam splitter geometry on the overlap of the measuring spots in the spectral channels is discussed. As a detector application a novel multichannel pyrometer is presented by means of which the influence of the object emissivity on the measuring accuracy has been reduced considerably.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Volkmar Norkus, Volkmar Norkus, Guenter Hofmann, Guenter Hofmann, Christian Schiewe, Christian Schiewe, } "Uncooled multispectral detectors and their applications", Proc. SPIE 2894, Detectors, Focal Plane Arrays, and Applications, (25 September 1996); doi: 10.1117/12.252079; https://doi.org/10.1117/12.252079


Uncooled multispectral detectors
Proceedings of SPIE (October 26 1998)
In-situ infrared detection of stack gases
Proceedings of SPIE (March 10 1993)
Optical and infrared detection using microcantilevers
Proceedings of SPIE (June 27 1996)
Research about CCD infrared three-color temperature sensor
Proceedings of SPIE (October 03 1996)

Back to Top