24 September 1996 Self-calibrating fiber optic level sensor system
Author Affiliations +
Proceedings Volume 2895, Fiber Optic Sensors V; (1996) https://doi.org/10.1117/12.252194
Event: Photonics China '96, 1996, Beijing, China
Abstract
A self-calibrating fiber-optic level sensor system composed of a fiber-optic pressure sensor and two optical fiber level probes is described. The pressure sensor is based on the photoelastic effect and compensated with a method of optical bridge. The optic fiber probe is based on an optical intensity modulation method in which the reflected optical power by the probe sensitively depends on the refractive index of the surrounding medium. In the self-calibrating system two optical fiber probes are set at two heights of the oil tank, which are as two basic reference points The pressure sensor is connected to the bottom of the tank to measure the static pressure continuously. As the liquid level passing the reference point the probe gives out a signal to the computer to correct the measurement errors and recalibrate the sensor. The system has been applied to actual measurement in industry and the long term accuracy has reached to 0.2$% of full-scale.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Qingxu Yu, Bing Qi, Jianhua Ding, Junxiu Lin, "Self-calibrating fiber optic level sensor system", Proc. SPIE 2895, Fiber Optic Sensors V, (24 September 1996); doi: 10.1117/12.252194; https://doi.org/10.1117/12.252194
PROCEEDINGS
4 PAGES


SHARE
Back to Top