11 December 1996 Microactuators as driving units for microbotic systems
Author Affiliations +
Proceedings Volume 2906, Microrobotics: Components and Applications; (1996) https://doi.org/10.1117/12.260624
Event: Photonics East '96, 1996, Boston, MA, United States
Abstract
The trend towards the integration of a multitude of functions in e.g. data end-, medical- and communication systems pushes the miniaturization of actuators for linear or rotational motions. Technical advantages of these devices are their low energy consumption, their potential for high precision positioning and their low inertial masses, which allow e.g. huge rotational frequencies. Appreciable forces and torques as well as appropriate mechanical interfaces to integrate these drive units into complete systems are necessary prerequisites for robotic applications, but rarely found up to now. Most of these difficulties arise due to the application of monolithic fabrication techniques, leading to structures of essentially planar nature and severe material restrictions. It turned out that only hybrid concepts and the assembly of components made from the most appropriate material open the chance to build up microactuators which are well suited for microrobotic systems. The contribution starts with a short description of the LIGA technique, which constitutes the major 3-D microfabrication method for the production of individual actuator components with structural heights of up to several millimeters made from a variety of function adapted materials. The assembling of these components results in microactuators with typical dimensions in the millimeter range. Examples are powerful electromagnetic micromotors, delivering torques much larger than one (mu) Nm and high rotational speeds which may be converted by use of LIGA fabricated gear-wheels to furthermore increase the torque. Huge forces are obtained in addition by use of microfabricated fluidic systems. Although small in size, the actuators still offer good handling opportunities and interfacing facilities to build up more complicated robotic systems.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Heinz Lehr, Heinz Lehr, S. Abel, S. Abel, J. Doepper, J. Doepper, Wolfgang Ehrfeld, Wolfgang Ehrfeld, B. Hagemann, B. Hagemann, Klaus Peter Kaemper, Klaus Peter Kaemper, Frank Michel, Frank Michel, Ch. Schulz, Ch. Schulz, C. Theurigen, C. Theurigen, } "Microactuators as driving units for microbotic systems", Proc. SPIE 2906, Microrobotics: Components and Applications, (11 December 1996); doi: 10.1117/12.260624; https://doi.org/10.1117/12.260624
PROCEEDINGS
9 PAGES


SHARE
Back to Top