20 December 1996 Design and numerical analysis of a silica-on-silicon integrated optical duplexer
Author Affiliations +
Proceedings Volume 2954, Fiber Integrated Optics; (1996) https://doi.org/10.1117/12.262431
Event: Advanced Imaging and Network Technologies, 1996, Berlin, Germany
Abstract
Silica-on-silicon is one of the best materials structures currently considered for production of integrated optical devices, in particular for telecommunication and signal processing applications. Deposition of silica films can be advantageously attained by the sol-gel technique, which permits both a great flexibility in the refractive index definition and the possibility of doping with rare earth ions. In this work, we designed and modeled an integrated optical duplexer, intended as a component of a fully- integrated erbium-doped optical amplifier, operating in the third telecommunication window. The guiding structures are of the strip-loaded type, to be realized by the sol-gel technique onto a buffered silicon substrate. Design optimization and modeling was carried out by a software package which was developed on purpose in MATLAB environment, mainly based on the Effective Index Method. Here we report a general design procedure for the above said component, which takes into account industrial production requirements as well as device's performance.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Michele A. Forastiere, Michele A. Forastiere, Giancarlo C. Righini, Giancarlo C. Righini, Alessandro Verciani, Alessandro Verciani, } "Design and numerical analysis of a silica-on-silicon integrated optical duplexer", Proc. SPIE 2954, Fiber Integrated Optics, (20 December 1996); doi: 10.1117/12.262431; https://doi.org/10.1117/12.262431
PROCEEDINGS
11 PAGES


SHARE
Back to Top