Paper
1 May 1997 Electrostatic discharge damage to pump lasers while operating
Richard G. S. Plumb, Anna M. Jeziorska
Author Affiliations +
Abstract
GaInAsP buried heterostructure pump lasers emitting at approximately 1480 nm have been subjected to simulated electrostatic discharge pulses, with one added feature over usual practice in that the lasers were run at close to maximum output while the pulses were applied. Using pulses in the forward bias direction, no perceptible damage occurred at up to 50 kV from a standard human body model of 100 pF discharging through 1500 (Omega) and the device under test. ESD pulses in the reverse direction caused damage at 5 to 12 kV, and the damage threshold was increased by about 600 V when the lasers were running during the test. Analysis of data, and physical arguments reveal the likely nature of damage and its causes, and the applicability of this theory to other device structures and wavelengths is discussed.
© (1997) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Richard G. S. Plumb and Anna M. Jeziorska "Electrostatic discharge damage to pump lasers while operating", Proc. SPIE 3004, Fabrication, Testing, and Reliability of Semiconductor Lasers II, (1 May 1997); https://doi.org/10.1117/12.273821
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Absorption

Quantum wells

Active optics

Capacitors

Optical damage

Pulsed laser operation

Resistors

Back to Top